AISI 304
The standard for food, beverage and general industry. With high corrosion resistance and an easily cleaned hygienic surface, it is ideal for processes without aggressive chemicals.
EN 1.4301 · X5CrNi18-10
Quality & Certificates
Quality is not a final check — it is every step.
For us quality is not an inspection at the end of production but a discipline embedded in every step, from material selection to documentation.
Material
AISI 316L
Thanks to its molybdenum alloy it offers superior resistance to chloride and acidic media. Low carbon content reduces post-weld corrosion; it is the choice of pharma and chemical processes.
EN 1.4404 · X2CrNiMo17-12-2Certificates
ISO 9001
Quality management system: processes that are defined, repeatable and auditable.
EN ISO 3834-2
Comprehensive quality requirements for welded fabrication; certified welders and qualified procedures required.
CE Marking
Declaration of the product’s conformity with the applicable EU directives.
PED 2014/68/EU
Design and manufacturing conformity under the Pressure Equipment Directive.
Testing and inspection
Leak test
All weld seams and connections are checked for leak tightness.
Hydrostatic pressure test
Pressure equipment is tested with water above its design values.
Surface roughness (Ra)
Roughness is measured and reported on hygienic surfaces.
Dimensional inspection
Dimensions, connection positions and tolerances are verified against the drawing.
Documentation
Every tank is delivered with a quality dossier: 3.1 material certificates, welding and test reports, Ra measurements and operating-maintenance documents. Your equipment’s history is documented from day one.
Let’s plan your project together.
Share your process requirements; we will come back within 48 hours with a sizing proposal and a budget frame.